SPIN CASTING
SPIN CASTING

SPIN CASTING

Centrifugal casting is an industrial production process that allows obtaining finished details in low-melting metal or resin in silicone rubber moulds.

Thanks to Nicem's experience, their continuous technological R&D of new materials, complete manufacturing systems are created that allow switching very quickly directly from prototype to finished and polished product, at a lower energy cost than usual and with extraordinary results.

There are 36 products.

Showing 1-12 of 36 item(s)
Active filters

Brand: Nicem

P 300 PILOT

Review(s): 0

Vulcanizing press for silicone and organic dies, equipped with heated plates from electric resistances.

In stock

Brand: Nicem

C 300 PILOT

Review(s): 0

Electronic centrifuges for the production of low-melting metal alloys items (zinc, tin, pewter, bismuth and eutectic alloys), polyester, epoxy and polyurethane resins, as well as waxes (micro-casting type).

In stock

Brand: Nicem

TRSME 350 AUTOMAT

Review(s): 0

3-station transfer TRSME 350 AUTOMAT used for the production of small and medium-sized parts made of low-melting metal alloys (zinc, tin, bismuth, eutectic alloys and lead), polyester, epoxy and polyurethane resins, as well as waxes (micro-casting type) with a productivity up to 200 castings/hour.

In stock

Brand: Nicem

TRA MATIC B

Review(s): 0

Cooling table with forced air circulation for moulds ranging from 230 to 400 mm in size. The optimum cooling of the moulds leads to its reuse sooner, increasing the mould’s duration and its productivity.

In stock

Brand: Nicem

F 50 PILOT

Review(s): 0

Automatic electric or gas (methane or propane) furnace dedicated to the melting process of low-melting metal alloys (zinc, tin, eutectic) and other materials.

In stock

Brand: Nicem

P 400 MATIC

Review(s): 0

Vulcanizing press for silicone and organic dies, equipped with heated plates from electric resistances. 

In stock

Brand: Nicem

C 400 MATIC

Review(s): 0

Electronic centrifuges for the production of low-melting metal alloys items (zinc, tin, pewter, bismuth and eutectic alloys), polyester, epoxy and polyurethane resins, as well as waxes (micro-casting type).

In stock

Brand: Nicem

TRSME 400 AUTOMAT

Review(s): 0

3-station transfer TRSME 400 AUTOMAT used for the production of small and medium-sized parts made of low-melting metal alloys (zinc, tin, bismuth, eutectic alloys and lead), polyester, epoxy and polyurethane resins, as well as waxes (micro-casting type) with a productivity up to 200 castings/hour.

In stock

Brand: Nicem

TRA MATIC C

Review(s): 0

Cooling table with forced air circulation for moulds ranging from 230 to 400 mm in size. The optimum cooling of the moulds leads to its reuse sooner, increasing the mould’s duration and its productivity. 

In stock

Brand: Nicem

F 80 MATIC

Review(s): 0

Automatic electric or gas (methane or propane) furnace dedicated to the melting process of low-melting metal alloys (zinc, tin, eutectic) and other materials. 

In stock