In stock
RESINCAST
Rating
A Premium Investment Powder for Resin/CAD casting, which has been tested and approved worldwide.
RESINCAST was developed by GSP - tried and tested by jewellery manufacturers worldwide. It is designed primarily for investing and burnout of CAD/CAM rapid prototype resin and resin/wax patterns.
Description
RESINCAST is an investment powder for CAD/CAM resin casting, offering the following benefits:
- Highest Quality raw materials sourced and graded for Resin/CAD casting;
- Formulated with a greater green strength enabling it to withstand the high Resin/CAD expansion;
- Can be used with any Resin/CAD manufacturer;
- Clean cut surface finish, sharp edges, without inclusions;
- Easy removal after casting, like your regular Gold Star investment powders;
- Gold Star Resincast has a very high cristobalite content and is therefore able to withstand a top burnout temperature of 850°c (1562°f). This will ensure that it can withstand the additional expansion stresses upon the mould and also remove the carbons which can, in some cases, remain within the mould and affect the quality of the casting;
- Resincast can also be used to produce injection wax castings and will easily cast all gold alloys.
Product Details
You may also be interested in...
In stock
In stock
In stock
In stock
In stock
Brand: GRS
GemSet
‘Stone In Place’ Casting Gold Star GemSet is a powder uniquely formulated to protect precious stones, especially diamonds, set into the wax prior to investing, burnout and during casting. GemSet's special formulation protects the gems from the heat of the burnout process and also during casting of the high temperature gold alloy. This powder produces the...
In stock
Brand: Yasui
RBF 19 – Rotating Burnout Furnace
It is NOT ONLY an Advanced Casting Machine which produces a good quality castings, but also the other allied equipment used in the lost wax Casting process that contribute towards the result of the castings. The burnout furnace is a very important piece of equipment in any casting house. It is of utmost importance to have accurate temperature uniformly...
In stock
In stock
Brand: freeman
Filigree Pink Flakes
Formerly sold as NYC Pink Flakes. Recommended for stone in place casting.
In stock
In stock
In stock
Brand: freeman
Aqua Green Flakes
This all-purpose injection wax is our most popular formulation as it provides the ideal balance of characteristics demanded by most designers and casters. Also recommended for stone in place casting.
In stock
Brand: GRS
Omega+
Ideal for high percentage palladium and nickel white gold. As the volume of SLA/CAD Master-Model casting increases, the necessity for a specific powder grows. Omega+ has been designed to withstand the challenges of SLA master model casting, both in terms of expansion of the pattern within the mould and carbon removal. Patterns from the following systems -...
In stock
In stock
In stock
A Premium Investment Powder for Resin/CAD casting, which has been tested and approved worldwide.
RESINCAST was developed by GSP - tried and tested by jewellery manufacturers worldwide. It is designed primarily for investing and burnout of CAD/CAM rapid prototype resin and resin/wax patterns.