.jpg)
Marca: Nicem
Electronic centrifuges for the production of low-melting metal alloys items (zinc, tin, pewter, bismuth and eutectic alloys), polyester, epoxy and polyurethane resins, as well as waxes (micro-casting type).
Marca: Nicem
Moulding frames to vulcanize the rubber dyes and moulds.The closing system allows quick and easy bracket opening. It is based on the wedge principle, which if it is inserted in the appropriate seats allows the opening and clamping of the exterior ring.
Marca: Nicem
Electronic centrifuges for the production of low-melting metal alloys items (zinc, tin, pewter, bismuth and eutectic alloys), polyester, epoxy and polyurethane resins, as well as waxes (micro-casting type).
Marca: Nicem
Electronic centrifuges for the production of low-melting metal alloys items (zinc, tin, pewter, bismuth and eutectic alloys), polyester, epoxy and polyurethane resins, as well as waxes (micro-casting type).
Marca: Nicem
Cooling table with forced air circulation for moulds ranging from 230 to 400 mm in size. The optimum cooling of the moulds leads to its reuse sooner, increasing the mould’s duration and its productivity.
Marca: Nicem
Vulcanizing press for silicone and organic dies, equipped with heated plates from electric resistances.
Marca: Nicem
Electronic centrifuges for the production of low-melting metal alloys items (zinc, tin, pewter, bismuth and eutectic alloys), polyester, epoxy and polyurethane resins, as well as waxes (micro-casting type).
Marca: Nicem
8-station transfer TRSE AUTOMAT used for the production of small and medium-sized parts made of low-melting metal alloys (zinc, tin, bismuth, eutectic alloys and lead), polyester, epoxy and polyurethane resins, as well as waxes (micro-casting type) with a productivity up to 300 castings/hour.
Marca: Nicem
Automatic electric or gas (methane or propane) furnace dedicated to the melting process of low-melting metal alloys (zinc, tin, eutectic) and other materials.
Marca: Nicem
Electronic centrifuges for the production of low-melting metal alloys items (zinc, tin, pewter, bismuth and eutectic alloys), polyester, epoxy and polyurethane resins, as well as waxes (micro-casting type)
Marca: Nicem
Electronic centrifuges for the production of low-melting metal alloys items (zinc, tin, pewter, bismuth and eutectic alloys), polyester, epoxy and polyurethane resins, as well as waxes (micro-casting type.
Marca: Nicem
3-station transfer TRSME 350 AUTOMAT used for the production of small and medium-sized parts made of low-melting metal alloys (zinc, tin, bismuth, eutectic alloys and lead), polyester, epoxy and polyurethane resins, as well as waxes (micro-casting type) with a productivity up to 200 castings/hour.
Marca: Nicem
Automatic electric or gas (methane or propane) furnace dedicated to the melting process of low-melting metal alloys (zinc, tin, eutectic) and other materials.
